Camass Specifications & Performance


Netfloor Camass CA1000 series

An environment-friendly low-profile cable management access floor system. The system, when assembled, shall be automatically formed grid-pattern cable trenches. Cable trenches' opening shall be width 90 mm within every 600 mm. The system shall be installed non-glued to the sub-floors.
Module Set:
Module Set:  Module set size: 600 mm x 600 mm (23.62 x 23.62) = 1 UniPanel + 1 Base Connector + 1 Central Cap + 4 Flank Caps.
System weight:
avg. 24 kg / per sq. meter (4.90 LB per sq. ft.)
Main Components:
UniPanel (Main Panel)
Size: 510 mm x 510 mm (20.07" x 20.07")
Thickness: 28 mm (1.10”)
Grooves: at four side of panel top, width 5 mm, length 410 mm, depth 8 mm.

structure: galvanized steel, special firm riveted process, top plate and bottom plate fully riveted, without punch out at the riveted point, to support panel body strength.

Pedestals: Galvanized steel pedestal topped with socket-set to firmly insert onto main panel’s four corners. Top of pedestals shall be hex-notched, for height adjustment by hex-key wrench.

Base Connector:
size: 180 X 180 mm ( 7.08” x 7.08”)  
square base connector with 4 upward round receptacles at corner to connect UniPanels’ pedestals. Rigid foam-pads adhered at bottom of the receptacle holes. Made of galvanized steel or steel with electro deposition.
Central Cap:
170 X 170 mm (6.69” X 6.69”), X-shape reinforced ribs at center of cap
Flank Cap:
210 X 124 mm (8.26” x 4.88”), reinforced ribs, strengthening bend at four sides. The 210 mm longer sides bend protected by rigid vinyl stripe.  
Cable Trench Capacity
Cable Trench opening width: 90 mm (3.54”)
Cable Trench inside width: 110 mm (4.33”)
Cable Trench clearance: system height minus 10 mm (0.4”)
Clearance under UniPanel (main panel): system height minus 28 mm (1.10”)
Loading Property: in accordance with CISCA
Concentration Load: UniPanel    
600 LB < 2.5 mm depression (1" square indenter)
Concentration ultimate load: safety factor greater than 2.75.

Uniform Distribution Load: UniPanel:
uniform ultimate load > 1500 psf
Flammability:
All steel system, non-combustible. Meet B S476 part 4, ASTM E-84

Environment Protection:

Re-usable: In the event of re-location, 100% components are re-usable

Recyclable: Components are 100% recyclable

LEED, BREEAM Compliance: The main panel (Unipanel) is self-stand. No adhesives are applied at installation. There is no glued onto the subfloor, and no damage to subfloor while removing.  




Warranty 5 years limited warranty.